My Shopping Cart
Hi Lo 6 inch Receiver with 4 inch Extension
(1x) $125.95
Hi Lo 2 inch Drop Receiver
(1x) $82.95
Hitch Mount Extended 4-Bike Rack Carrier
(1x) $129.95
Adventurer Tow Bar, Step Type, Class III
(1x) $231.95
My Vehicle
Tow Bars
Tow Bar Accessories
Carriers
Rock Guards
General Towing
Dealer Information
Weight Distribution & Sway Pro FAQ's
To Tow You Need 3 Things...
- The Towing Vehicle
- A Towing Package
- The Vehicle being Towed
| Topics To Help You Through This Complicated Topic |
|---|
How much maintenance is there?
People familiar with other weight distributing, sway control hitches will appreciate SwayPro's minimal maintenance. SwayPro has two easily-accessible grease fittings that require a shot of grease about every other long trip. Accidentally over-greasing may result in a clean up task, but it will not damage the SwayPro.
Do I have to add an after-market sway control to the SwayPro?
No, SwayPro has designed-in sway control functionality.
What size do I need?
The SwayPro hitch is supplied with one of four standard pairs of spring bars. Spring bar selection is based on your trailer's tongue weight rating. Spring bars are rated for 550, 750, 1000, 1500 lbs tongue weight.
How long will a SwayPro last?
With proper lubrication and use, we expect your hitch's life to exceed that of your trailer. SwayPro hitches are covered by a limited life-time warranty.
Do I have to disable the sway control to back up?
No. You back up normally.
What controls the sway?
The SwayPro's four points of control exert forces on the trailer tongue and on the tow vehicle that are engineered to nullify sway.
The SwayPro has 4 points of control?
Yes. The SwayPro controls swaying motion between itself and the trailer tongue with a pair of control links that capture the spring bar tensioning chains and limit their horizontal movement. In addition, the SwayPro has two friction adjusting bolts in the head.
Do I have to buy a complete new system when I trade up to a heaver trailer?
No. You may need two higher-rated spring bars, but everything else is the same for the four different tongue weight ratings.
Do I have to keep extra pins or clips like I did for my old hitch?
No. SwayPro has self-locking snap up brackets. There are no loose parts to track. There are no pins or clips on the entire weight distribution hitch.
How are the tongue brackets attached?
Tongue brackets are clamped to the tongue with clamping bolts or permanently attached with bolts through drilled holes.
How do the Sway bars lock?
The sway bars have a slotted groove on one end that inserts into the hitch head. Insert, twist, and the spring bar locks into place.
How is the head adjusted?
The SwayPro is adjusted with a simple thumb screw. Head mounting bolts are loosened (not removed), the thumbscrew is adjusted, and mounting bolts are retightened. Nothing is disassembled or removed from the hitch in this process.
Is there something I could do if I have to turn extremely short turning situation?
You just take normal precautions when making sharp turning maneuvers to make sure your tow vehicle and trailer do not contact each other.
Can I use SwayPro if I have surge brakes installed on my towed vehicle?
SwayPro’s dual benefits of weight distribution and sway control also work for you when your towed vehicle is equipped with surge brakes. SwayPro’s operation is unchanged when towing with a surge brake actuator in place of a simple hitch coupler. However, the effects of the small compression and return motion (approximately an inch) that occurs in the surge brake actuator effects conventional sway control, and surge brake manufacturers have established varying requirements for using their products with conventional sway control products and weight distributing hitches.
Whatever the limitations placed on other hitch products, SwayPro’s functioning is unchanged when towing with surge brakes. Blue Ox recommends that you check with the manufacturer of your particular surge brake actuator before using their product with any weight distributing hitch.
Do I need to grease the spring bars?
Grease is captured inside the spring bar head. Grease is never applied to spring bars. Use a high quality moly-based bearing grease. Do not use a silicon-based grease. (Example: use ThermaPlex Hi-Load grease (ThermaPlex part no. 70414) or similar. "Moly" = molybdenum disulfide.)
Should I keep some plastic bags to put over the ends of the spring bars when I take them out to keep the grease off my vehicle when I store them?
No. The SwayPro spring bars just snap out with a ¼ turn, and are always clean, and grease-free. No grease is ever applied to the spring bars.
If I have a tongue weight of 500lbs can I use the BXW1000 spring bars?
You need to stay within your tongue rating. You would need to order the BXW0550 spring bars. Overly stiff spring bars yield a rough ride and can overstress a trailer tongue.
How do I know if I'm using the correct chain link when tensioning spring bars?
Choose the chain link that lifts the spring bar end and aligns the spring bar in a position parallel to the trailer tongue frame.
 |
 |
Why Shop With Us?
98% Of All Orders Ship Within 24 Hours!
Towing Experts
We have over 30+ years experience in the towing industry! We are the experts! Towing Experts...
Lifetime Guarantee
We are the only tow bar company online that offers you a Lifetime Guarantee on all of the products that we offer. Lifetime Tow Bar Guarantee...
Secure Shopping
This site is tested and certified daily to pass the HACKER SAFE Security Scan.
110% Price Protection
Find the exact same product bought from us for a lower price on another web site, we will refund you 110% of the difference between the lower price and our price. 110% Price Protection...
Easy Returns
If you need to exchange a product that you ordered from us please contact us via our telephone number to work out the exchange - without any hassles or headaches. Easy Returns...
Knowledgeable Support
Call 817-488-1526 for expert advice on everything we offer.
Customer Service Hours
M - F: 8am to 5pm (CST)
 |
 |
 |
 |
 |
 |
 |
 |
